1041 Accessories

Lenses

CR
Flat Clear lens
FR
Flat Frosted lens

Ground Stakes and Pedestals

CP-150
Commercial grade heavy-duty PVC mounting pedestal with side junction box and ½" grounded FPT on top
CP-150
MP-150
3" dia. black PVC mounting pedestal with ½" FPT on top
MP-150

Junction Boxes

JB-200
Composite (Ryton™ R-4) in-ground junction box with two ½" FPT bottom inlets and a gasketed cover with a ½" FPT
JB-200
JB-250
Composite (Ryton™ R-4) in-ground junction box with two ½" FPT bottom inlets, two ½" FPT side inlets and a gasketed cover with a ½" FPT
JB-250
JB-300
Composite (Ryton™ R-4) in-ground junction box with two ¾" FPT bottom inlets and a gasketed cover with a ½" FPT
JB-300
JB-350
Composite (Ryton™ R-4) in-ground junction box with two ¾" FPT bottom inlets, two ½" FPT side inlets and a gasketed cover with a ½" FPT
JB-350
TAK-150
Bungee strap adapter kit for tree mount junction boxes (bungee not included)
TAK-150
TM-120
Die-cast aluminum line voltage tree mount junction box with ½" FPT
TM-120

Tenon Mount Accessories

DTM-200
Double Post Mount Tenon Bracket
Extruded aluminum mounting tenon bracket slipfits directly over tenons on Vista’s stanchion mounts, post mounts, wall-mount brackets, as well as standard 2" pipe (2-3/8" O.D). The post mount is secured with two ¼" #20 Allen set screws and has dual tenons for slipfitting Vista’s mounting caps. The sturdy construction assures a balanced and stable support for large Vista luminaires.
DTM-200
HTM-200
Wall Mounting Bracket
Extruded aluminum mounting tenon secures flush to flat surfaces including walls, walkways, fences, wood posts, or almost anywhere - horizontal, vertical, or otherwise. The bracket can be bolted directly using standard hardware and its low profile design will not distract from your Vista fixture. A wide opening in the rear of the bracket allows for easy wireway access.
HTM-200
QTM-200
Quad Post Mount Tenon Bracket
Extruded aluminum mounting tenon bracket slipfits directly over tenons on Vista’s stanchion mounts, post mounts, wall mount brackets, as well as standard 2" pipe (2-3/8" O.D). The sturdy construction assures a balanced and stable support for large Vista luminaires.
QTM-200
STM-218
High Stanchion Mount
Extruded aluminum stanchion mount secures flush to any flat surface including walkways, decks, cement foundations, or almost anywhere - horizontal, vertical, or otherwise. The bracket can be bolted directly using standard hardware as well as implanted in poured concrete or in-grade. A wide opening in the bottom of the stanchion allows for easy conduit access. The stanchion is also available in custom lengths - consult your local distributor for ordering information.
STM-218
TTM-200
Triple Post Mount Tenon Bracket
Extruded aluminum mounting tenon bracket slipfits directly over tenons on Vista’s stanchion mounts, post mounts, wall mount brackets, as well as standard 2" pipe (2-3/8" O.D). The sturdy construction assures a balanced and stable support for large Vista luminaires.
TTM-200
VTM-200
Wall Mounting Bracket
Extruded aluminum mounting tenon secures flush to flat surfaces including walls, walkways, fences, wood posts, or almost anywhere - horizontal, vertical, or otherwise. The bracket can be bolted directly using standard hardware and its low profile design will not distract from your Vista fixture. A wide opening in the rear of the bracket allows for easy wireway access.
VTM-200
CTM-200
Mounting Cap
Die-cast aluminum mounting cap fits directly over tenons on Vista’s stancion mounts, post mounts, wall-mount brackets, as well as standard 2" pipe (2-3/8" O.D). The mounting cap is secured to the tenons with two ¼" #20 Allen set screws. The exterior design allows for a wide angle of tilt of the fixture as well as 360° of rotation.
CTM-200